dmesg - first install tests
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-58-generic (buildd@allspice) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #97-Ubuntu SMP Wed Jul 8 02:56:15 UTC 2015 (Ubuntu 3.13.0-58.97-generic 3.13.11-ckt22)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007de41fff] usable
BIOS-e820: [mem 0x000000007de42000-0x000000007ded0fff] reserved
BIOS-e820: [mem 0x000000007ded1000-0x000000007dfd9fff] ACPI data
BIOS-e820: [mem 0x000000007dfda000-0x000000007e1dcfff] ACPI NVS
BIOS-e820: [mem 0x000000007e1dd000-0x000000007f362fff] reserved
BIOS-e820: [mem 0x000000007f363000-0x000000007f7fffff] ACPI NVS
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000207fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Supermicro X9SRE/X9SRE-3F/X9SRi/X9SRi-3F/X9SRE/X9SRE-3F/X9SRi/X9SRi-3F, BIOS 3.0a 01/03/2014
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x2080000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask 3FE000000000 write-back
1 base 002000000000 mask 3FFF80000000 write-back
2 base 000080000000 mask 3FFF80000000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 128GB, type WB
reg 1, base: 128GB, range: 2GB, type WB
reg 2, base: 2GB, range: 2GB, type UC
total RAM covered: 131072M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 64K num_reg: 7 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 4GB, range: 4GB, type WB
reg 2, base: 8GB, range: 8GB, type WB
reg 3, base: 16GB, range: 16GB, type WB
reg 4, base: 32GB, range: 32GB, type WB
reg 5, base: 64GB, range: 64GB, type WB
reg 6, base: 128GB, range: 2GB, type WB
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0x7de42 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd900-0x000fd90f] mapped at [ffff8800000fd900]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000094000] 94000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x207fe00000-0x207fffffff]
[mem 0x207fe00000-0x207fffffff] page 1G
init_memory_mapping: [mem 0x207c000000-0x207fdfffff]
[mem 0x207c000000-0x207fdfffff] page 1G
init_memory_mapping: [mem 0x2000000000-0x207bffffff]
[mem 0x2000000000-0x207bffffff] page 1G
init_memory_mapping: [mem 0x1000000000-0x1fffffffff]
[mem 0x1000000000-0x1fffffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x7de41fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x7ddfffff] page 2M
[mem 0x7de00000-0x7de41fff] page 4k
init_memory_mapping: [mem 0x100000000-0xfffffffff]
[mem 0x100000000-0xfffffffff] page 1G
RAMDISK: [mem 0x35856000-0x36c22fff]
ACPI: RSDP 00000000000f04a0 000024 (v02 SUPERM)
ACPI: XSDT 000000007df06088 00008C (v01 SUPERM SMCI--MB 00000001 AMI 00010013)
ACPI: FACP 000000007df10d88 0000F4 (v04 SUPERM SMCI--MB 00000001 AMI 00010013)
ACPI: DSDT 000000007df061a0 00ABE6 (v02 SUPERM SMCI--MB 00000000 INTL 20091112)
ACPI: FACS 000000007e1d4080 000040
ACPI: APIC 000000007df10e80 000100 (v03 00000001 AMI 00010013)
ACPI: FPDT 000000007df10f80 000044 (v01 00000001 AMI 00010013)
ACPI: HPET 000000007df10fc8 000038 (v01 SUPERM SMCI--MB 00000001 AMI. 00000005)
ACPI: PRAD 000000007df11000 0000BE (v02 PRADID PRADTID 00000001 MSFT 04000000)
ACPI: SPMI 000000007df110c0 000040 (v05 A M I OEMSPMI 00000000 AMI. 00000000)
ACPI: SSDT 000000007df11100 0C7AE8 (v02 INTEL CpuPm 00004000 INTL 20091112)
ACPI: EINJ 000000007dfd8be8 000130 (v01 AMI AMI EINJ 00000000 00000000)
ACPI: ERST 000000007dfd8d18 000230 (v01 AMIER AMI ERST 00000000 00000000)
ACPI: HEST 000000007dfd8f48 0000A8 (v01 AMI AMI HEST 00000000 00000000)
ACPI: BERT 000000007dfd8ff0 000030 (v01 AMI AMI BERT 00000000 00000000)
ACPI: DMAR 000000007dfd9020 0000BC (v01 A M I OEMDMAR 00000001 INTL 00000001)
ACPI: MCFG 000000007dfd90e0 00003C (v01 SUPERM SMCI--MB 00000001 MSFT 00000097)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000207fffffff]
Initmem setup node 0 [mem 0x00000000-0x207fffffff]
NODE_DATA [mem 0x207fff9000-0x207fffdfff]
[ffffea0000000000-ffffea0081ffffff] PMD -> [ffff881fff600000-ffff88207f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x207fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00099fff]
node 0: [mem 0x00100000-0x7de41fff]
node 0: [mem 0x100000000-0x207fffffff]
On node 0 totalpages: 33545691
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3993 pages, LIFO batch:0
DMA32 zone: 7994 pages used for memmap
DMA32 zone: 511554 pages, LIFO batch:31
Normal zone: 516096 pages used for memmap
Normal zone: 33030144 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7de42000-0x7ded0fff]
PM: Registered nosave memory: [mem 0x7ded1000-0x7dfd9fff]
PM: Registered nosave memory: [mem 0x7dfda000-0x7e1dcfff]
PM: Registered nosave memory: [mem 0x7e1dd000-0x7f362fff]
PM: Registered nosave memory: [mem 0x7f363000-0x7f7fffff]
PM: Registered nosave memory: [mem 0x7f800000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88207fc00000 s81536 r8192 d20864 u131072
pcpu-alloc: s81536 r8192 d20864 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 33021516
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 131981264K/134182764K available (7393K kernel code, 1146K rwdata, 3416K rodata, 1336K init, 1448K bss, 2201500K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=12.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-11.
NR_IRQS:16640 nr_irqs:1184 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 536870912 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3500.175 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.35 BogoMIPS (lpj=14000700)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 16777216 (order: 15, 134217728 bytes)
Inode-cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Mount-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mountpoint-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 23 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28586 entries in 112 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffc000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de
dmar: RMRR base: 0x0000007dea7000 end: 0x0000007deb3fff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000fbffc000 proximity domain: 0x0
IOAPIC id 0 under DRHD base 0xfbffc000 IOMMU 0
IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0
HPET id 0 under DRHD base 0xfbffc000
Enabled IRQ remapping in x2apic mode
Enabling x2apic
Enabled x2apic
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1650 v2 @ 3.50GHz (fam: 06, model: 3e, stepping: 04)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
x86: Booted up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (84004.20 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x7dfda000-0x7e1dcfff] (2109440 bytes)
PM: Registering ACPI NVS region [mem 0x7f363000-0x7f7fffff] (4837376 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 11:57:41, date: 07/23/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
_OSC request data:1 1f
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PME AER]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xfed08000-0xfed08fff]
pci_bus 0000:00: root bus resource [mem 0xfed0e000-0xfed0ffff]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff]
pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:0e04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:03.2: [8086:0e0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: System wakeup disabled by ACPI
pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xfba1c000-0xfba1ffff 64bit]
pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xfba18000-0xfba1bfff 64bit]
pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xfba14000-0xfba17fff 64bit]
pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xfba10000-0xfba13fff 64bit]
pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xfba0c000-0xfba0ffff 64bit]
pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xfba08000-0xfba0bfff 64bit]
pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xfba04000-0xfba07fff 64bit]
pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xfba00000-0xfba03fff 64bit]
pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000
pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfba25000-0xfba25fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfba23000-0xfba233ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfba22000-0xfba223ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x14: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x18: [io 0xf030-0xf037]
pci 0000:00:1f.2: reg 0x1c: [io 0xf020-0xf023]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfba21000-0xfba217ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfba20000-0xfba200ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x1180-0x119f]
pci 0000:00:1f.6: [8086:1d24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xfed08000-0xfed08fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:1521] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfb920000-0xfb93ffff]
pci 0000:03:00.0: reg 0x1c: [mem 0xfb9c4000-0xfb9c7fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: reg 0x184: [mem 0xfb9a0000-0xfb9a3fff]
pci 0000:03:00.0: reg 0x190: [mem 0xfb980000-0xfb983fff]
pci 0000:03:00.1: [8086:1521] type 00 class 0x020000
pci 0000:03:00.1: reg 0x10: [mem 0xfb900000-0xfb91ffff]
pci 0000:03:00.1: reg 0x1c: [mem 0xfb9c0000-0xfb9c3fff]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: reg 0x184: [mem 0xfb960000-0xfb963fff]
pci 0000:03:00.1: reg 0x190: [mem 0xfb940000-0xfb943fff]
pci 0000:00:03.0: PCI bridge to [bus 03-04]
pci 0000:00:03.0: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:03.2: PCI bridge to [bus 05]
pci 0000:06:00.0: [8086:1d6b] type 00 class 0x010700
pci 0000:06:00.0: reg 0x10: [mem 0xfa47c000-0xfa47ffff 64bit pref]
pci 0000:06:00.0: reg 0x18: [mem 0xfa000000-0xfa3fffff 64bit pref]
pci 0000:06:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:06:00.0: reg 0x164: [mem 0xfa400000-0xfa403fff 64bit pref]
pci 0000:00:11.0: PCI bridge to [bus 06]
pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref]
pci 0000:07:04.0: [102b:0532] type 00 class 0x030000
pci 0000:07:04.0: reg 0x10: [mem 0xf9000000-0xf9ffffff pref]
pci 0000:07:04.0: reg 0x14: [mem 0xfb800000-0xfb803fff]
pci 0000:07:04.0: reg 0x18: [mem 0xfb000000-0xfb7fffff]
pci 0000:00:1e.0: PCI bridge to [bus 07] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff]
pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03df] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed08000-0xfed08fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed0e000-0xfed0ffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x80000000-0xfbffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0 (pxm 0)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000
pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:0ee4] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:0ee5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000
pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000
pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000
pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100
pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000
pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100
pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000
pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000
pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000
pci_bus 0000:ff: on NUMA node 0 (pxm 0)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
ACPI Error: [\_SB_.PRAD] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_GPE._L24] (Node ffff881fd292dbb8), AE_NOT_FOUND (20131115/psparse-536)
ACPI Exception: AE_NOT_FOUND, while evaluating GPE method [_L24] (20131115/evgpe-580)
ACPI: \_SB_.UNC0: notify handler is installed
Found 2 acpi root devices
vgaarb: setting as boot device: PCI:0000:07:04.0
vgaarb: device added: PCI:0000:07:04.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:07:04.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7de42000-0x7fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
system 00:05: [io 0x04d0-0x04d1] has been reserved
system 00:05: [mem 0x00000400-0x000004ff] could not be reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:07: [io 0x0a30-0x0a3f] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
pnp 00:09: [dma 0 disabled]
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: [dma 0 disabled]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:0b: [io 0x0b00-0x0b7f] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0c: Plug and Play ACPI device, IDs IPI0001 (active)
system 00:0d: [io 0x0400-0x0453] could not be reserved
system 00:0d: [io 0x0458-0x047f] has been reserved
system 00:0d: [io 0x1180-0x119f] has been reserved
system 00:0d: [io 0x0500-0x057f] has been reserved
system 00:0d: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0d: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:0d: [mem 0xff000000-0xffffffff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:0e: [io 0x0454-0x0457] has been reserved
system 00:0e: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:0f: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 17 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 03-04]
pci 0000:00:03.0: bridge window [mem 0xfb900000-0xfb9fffff]
pci 0000:00:03.2: PCI bridge to [bus 05]
pci 0000:00:11.0: PCI bridge to [bus 06]
pci 0000:00:11.0: bridge window [io 0xe000-0xefff]
pci 0000:00:11.0: bridge window [mem 0xfa000000-0xfa4fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07]
pci 0000:00:1e.0: bridge window [mem 0xfb000000-0xfb8fffff]
pci 0000:00:1e.0: bridge window [mem 0xf9000000-0xf9ffffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 10 [mem 0xfed08000-0xfed08fff]
pci_bus 0000:00: resource 11 [mem 0xfed0e000-0xfed0ffff]
pci_bus 0000:00: resource 12 [mem 0x80000000-0xfbffffff]
pci_bus 0000:03: resource 1 [mem 0xfb900000-0xfb9fffff]
pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
pci_bus 0000:06: resource 2 [mem 0xfa000000-0xfa4fffff 64bit pref]
pci_bus 0000:07: resource 1 [mem 0xfb000000-0xfb8fffff]
pci_bus 0000:07: resource 2 [mem 0xf9000000-0xf9ffffff 64bit pref]
pci_bus 0000:07: resource 4 [io 0x0000-0x03af]
pci_bus 0000:07: resource 5 [io 0x03e0-0x0cf7]
pci_bus 0000:07: resource 6 [io 0x03b0-0x03df]
pci_bus 0000:07: resource 7 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 8 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 9 [mem 0x000c0000-0x000dffff]
pci_bus 0000:07: resource 10 [mem 0xfed08000-0xfed08fff]
pci_bus 0000:07: resource 11 [mem 0xfed0e000-0xfed0ffff]
pci_bus 0000:07: resource 12 [mem 0x80000000-0xfbffffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 65536 (order: 9, 2097152 bytes)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes)
NET: Registered protocol family 1
pci 0000:07:04.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20276K (ffff880035856000 - ffff880036c23000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x79e42000-0x7de42000] (64MB) mapped at [ffff880079e42000-ffff88007de41fff]
microcode: CPU0 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU1 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU2 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU3 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU4 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU5 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU6 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU7 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU8 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU9 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU10 sig=0x306e4, pf=0x1, revision=0x416
microcode: CPU11 sig=0x306e4, pf=0x1, revision=0x416
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1437652660.640:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 32768
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 640x480x32, linelength=2560, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xf9000000, mapped to 0xffffc9001cf00000, using 1216k, total 1216k
Console: switching to colour frame buffer device 80x30
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3E
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:09: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
serial8250: ttyS2 at I/O 0x3e8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfba23000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-58-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfba22000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-58-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 70a97eeab2625639df8c9979476fd1516dcd650b'
usb 1-1: new high-speed USB device number 2 using ehci-pci
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 7:343:985
memory memory842: hash matches
memory memory396: hash matches
rtc_cmos 00:03: setting system clock to 2015-07-23 11:57:42 UTC (1437652662)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
Freeing unused kernel memory: 788K (ffff88000173b000 - ffff880001800000)
tsc: Refined TSC clocksource calibration: 3499.954 MHz
Freeing unused kernel memory: 680K (ffff880001b56000 - ffff880001c00000)
systemd-udevd[171]: starting version 204
usb 2-1: new high-speed USB device number 2 using ehci-pci
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
md: linear personality registered for level -1
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 65 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfba21000 port 0xfba21100 irq 65
ata2: SATA max UDMA/133 abar m2048@0xfba21000 port 0xfba21180 irq 65
ata3: SATA max UDMA/133 abar m2048@0xfba21000 port 0xfba21200 irq 65
ata4: SATA max UDMA/133 abar m2048@0xfba21000 port 0xfba21280 irq 65
ata5: SATA max UDMA/133 abar m2048@0xfba21000 port 0xfba21300 irq 65
ata6: SATA max UDMA/133 abar m2048@0xfba21000 port 0xfba21380 irq 65
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.6: new full-speed USB device number 3 using ehci-pci
md: multipath personality registered for level -4
usb 1-1.6: New USB device found, idVendor=0557, idProduct=2221
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: Hermon USB hidmouse Device
usb 1-1.6: Manufacturer: Winbond Electronics Corp
dca service started, version 1.12.1
isci: Intel(R) C600 SAS Controller Driver - version 1.1.0
hidraw: raw HID events driver (C) Jiri Kosina
isci 0000:06:00.0: driver configured for rev: 6 silicon
md: raid0 personality registered for level 0
usbcore: registered new interface driver usbhid
ata3: SATA link down (SStatus 0 SControl 300)
usbhid: USB HID core driver
isci 0000:06:00.0: OEM parameter table found in OROM
isci 0000:06:00.0: OEM SAS parameters (version: 1.0) loaded (platform)
isci 0000:06:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short}
scsi6 : isci
isci 0000:06:00.0: irq 66 for MSI/MSI-X
isci 0000:06:00.0: irq 67 for MSI/MSI-X
ata6: SATA link down (SStatus 0 SControl 300)
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
md: raid1 personality registered for level 1
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: HGST HUS724020ALA640, MF6OAA70, max UDMA/133
ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ATA-8: HGST HUS724020ALA640, MF6OAA70, max UDMA/133
ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi: waiting for bus probes to complete ...
ata2.00: configured for UDMA/133
igb: Copyright (c) 2007-2013 Intel Corporation.
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input5
igb 0000:03:00.0: irq 68 for MSI/MSI-X
igb 0000:03:00.0: irq 69 for MSI/MSI-X
igb 0000:03:00.0: irq 70 for MSI/MSI-X
igb 0000:03:00.0: irq 71 for MSI/MSI-X
igb 0000:03:00.0: irq 72 for MSI/MSI-X
igb 0000:03:00.0: irq 73 for MSI/MSI-X
igb 0000:03:00.0: irq 74 for MSI/MSI-X
igb 0000:03:00.0: irq 75 for MSI/MSI-X
igb 0000:03:00.0: irq 76 for MSI/MSI-X
igb 0000:03:00.0: irq 68 for MSI/MSI-X
igb 0000:03:00.0: irq 69 for MSI/MSI-X
igb 0000:03:00.0: irq 70 for MSI/MSI-X
igb 0000:03:00.0: irq 71 for MSI/MSI-X
igb 0000:03:00.0: irq 72 for MSI/MSI-X
igb 0000:03:00.0: irq 73 for MSI/MSI-X
igb 0000:03:00.0: irq 74 for MSI/MSI-X
igb 0000:03:00.0: irq 75 for MSI/MSI-X
igb 0000:03:00.0: irq 76 for MSI/MSI-X
hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.6/input0
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/input/input6
hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.6/input1
raid6: sse2x1 9405 MB/s
igb 0000:03:00.0: added PHC on eth0
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:07:6a:e6
igb 0000:03:00.0: eth0: PBA No: FFFFFF-0FF
igb 0000:03:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:03:00.1: irq 77 for MSI/MSI-X
igb 0000:03:00.1: irq 78 for MSI/MSI-X
igb 0000:03:00.1: irq 79 for MSI/MSI-X
igb 0000:03:00.1: irq 80 for MSI/MSI-X
igb 0000:03:00.1: irq 81 for MSI/MSI-X
igb 0000:03:00.1: irq 82 for MSI/MSI-X
igb 0000:03:00.1: irq 83 for MSI/MSI-X
igb 0000:03:00.1: irq 84 for MSI/MSI-X
igb 0000:03:00.1: irq 85 for MSI/MSI-X
igb 0000:03:00.1: irq 77 for MSI/MSI-X
igb 0000:03:00.1: irq 78 for MSI/MSI-X
igb 0000:03:00.1: irq 79 for MSI/MSI-X
igb 0000:03:00.1: irq 80 for MSI/MSI-X
igb 0000:03:00.1: irq 81 for MSI/MSI-X
igb 0000:03:00.1: irq 82 for MSI/MSI-X
igb 0000:03:00.1: irq 83 for MSI/MSI-X
igb 0000:03:00.1: irq 84 for MSI/MSI-X
igb 0000:03:00.1: irq 85 for MSI/MSI-X
raid6: sse2x2 11526 MB/s
igb 0000:03:00.1: added PHC on eth1
igb 0000:03:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:07:6a:e7
igb 0000:03:00.1: eth1: PBA No: FFFFFF-0FF
igb 0000:03:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
raid6: sse2x4 13303 MB/s
raid6: using algorithm sse2x4 (13303 MB/s)
raid6: using ssse3x2 recovery algorithm
scsi 0:0:0:0: Direct-Access ATA HGST HUS724020AL MF6O PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
scsi 1:0:0:0: Direct-Access ATA HGST HUS724020AL MF6O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1 sdb2 sdb3 sdb4
sd 1:0:0:0: [sdb] Attached SCSI disk
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
Switched to clocksource tsc
xor: automatically using best checksumming function:
avx : 27560.000 MB/sec
async_tx: api initialized (async)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: raid10 personality registered for level 10
md: bind
md: bind
md: bind
md/raid1:md3: active with 2 out of 2 mirrors
md3: detected capacity change from 0 to 1971034456064
md: bind
md3: unknown partition table
md/raid1:md2: active with 2 out of 2 mirrors
md2: detected capacity change from 0 to 20970405888
md2: unknown partition table
bio: create slab at 1
Btrfs loaded
random: nonblocking pool is initialized
EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null)
init: plymouth-upstart-bridge main process (310) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (323) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
Adding 8190972k swap on /dev/sda4. Priority:-1 extents:1 across:8190972k FS
Adding 8190972k swap on /dev/sdb4. Priority:-2 extents:1 across:8190972k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
EXT4-fs (md2): re-mounted. Opts: errors=remount-ro
systemd-udevd[432]: starting version 204
EXT4-fs (md3): mounted filesystem with ordered data mode. Opts: (null)
lp: driver loaded but no devices found
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
wmi: Mapper loaded
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GINV 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 2 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.PCI0.HEC2.GPO2 3 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
ioatdma: Intel(R) QuickData Technology Driver 4.00
ioatdma 0000:00:04.0: irq 86 for MSI/MSI-X
igb 0000:03:00.0: DCA enabled
igb 0000:03:00.1: DCA enabled
ioatdma 0000:00:04.1: irq 87 for MSI/MSI-X
ioatdma 0000:00:04.2: irq 88 for MSI/MSI-X
ioatdma 0000:00:04.3: irq 89 for MSI/MSI-X
ioatdma 0000:00:04.4: irq 90 for MSI/MSI-X
ioatdma 0000:00:04.5: irq 91 for MSI/MSI-X
ioatdma 0000:00:04.6: irq 92 for MSI/MSI-X
ioatdma 0000:00:04.7: irq 93 for MSI/MSI-X
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:0c: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:0ea0
EDAC sbridge: Seeking for: dev 0e.0 PCI ID 8086:0ea0
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:0ea8
EDAC sbridge: Seeking for: dev 0f.0 PCI ID 8086:0ea8
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:0e71
EDAC sbridge: Seeking for: dev 0f.1 PCI ID 8086:0e71
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:0eaa
EDAC sbridge: Seeking for: dev 0f.2 PCI ID 8086:0eaa
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:0eab
EDAC sbridge: Seeking for: dev 0f.3 PCI ID 8086:0eab
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:0eac
EDAC sbridge: Seeking for: dev 0f.4 PCI ID 8086:0eac
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:0ead
EDAC sbridge: Seeking for: dev 0f.5 PCI ID 8086:0ead
EDAC sbridge: Seeking for: dev 16.0 PCI ID 8086:0ec8
EDAC sbridge: Seeking for: dev 16.0 PCI ID 8086:0ec8
EDAC sbridge: Seeking for: dev 16.1 PCI ID 8086:0ec9
EDAC sbridge: Seeking for: dev 16.1 PCI ID 8086:0ec9
EDAC sbridge: Seeking for: dev 16.2 PCI ID 8086:0eca
EDAC sbridge: Seeking for: dev 16.2 PCI ID 8086:0eca
EDAC sbridge: Seeking for: dev 1c.0 PCI ID 8086:0e60
EDAC sbridge: Seeking for: dev 1d.2 PCI ID 8086:0e6a
EDAC sbridge: Seeking for: dev 1d.3 PCI ID 8086:0e6b
EDAC sbridge: Seeking for: dev 11.0 PCI ID 8086:0eb8
EDAC sbridge: Seeking for: dev 11.4 PCI ID 8086:0ebc
EDAC MC0: Giving out device to module sbridge_edac.c controller Ivy Bridge Socket#0: DEV 0000:ff:0e.0 (POLLED)
EDAC sbridge: Driver loaded.
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
mei_me 0000:00:16.0: initialization failed.
ipmi_si 00:0c: Found new BMC (man_id: 0x002a7c, prod_id: 0x062b, dev_id: 0x20)
ipmi_si 00:0c: IPMI kcs interface initialized
type=1400 audit(1437652671.677:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=645 comm="apparmor_parser"
type=1400 audit(1437652671.677:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=645 comm="apparmor_parser"
type=1400 audit(1437652671.677:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=645 comm="apparmor_parser"
type=1400 audit(1437652671.677:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=644 comm="apparmor_parser"
type=1400 audit(1437652671.677:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=644 comm="apparmor_parser"
type=1400 audit(1437652671.677:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=644 comm="apparmor_parser"
type=1400 audit(1437652671.677:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=646 comm="apparmor_parser"
type=1400 audit(1437652671.677:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=646 comm="apparmor_parser"
type=1400 audit(1437652671.677:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=646 comm="apparmor_parser"
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
init: failsafe main process (713) killed by TERM signal
type=1400 audit(1437652677.517:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1061 comm="apparmor_parser"
type=1400 audit(1437652677.517:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1061 comm="apparmor_parser"
type=1400 audit(1437652677.517:13): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1061 comm="apparmor_parser"
type=1400 audit(1437652677.517:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1061 comm="apparmor_parser"
type=1400 audit(1437652677.517:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1061 comm="apparmor_parser"
type=1400 audit(1437652677.517:16): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1061 comm="apparmor_parser"
type=1400 audit(1437652677.585:17): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/named" pid=1062 comm="apparmor_parser"
type=1400 audit(1437652677.601:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=1064 comm="apparmor_parser"
init: plymouth-upstart-bridge main process ended, respawning
SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
NTFS driver 2.1.30 [Flags: R/O MODULE].
QNX4 filesystem 0.2.3 registered.
init: cron main process (1136) killed by KILL signal
init: cron main process ended, respawning
init: cron main process (10323) killed by TERM signal
init: cron main process (10340) killed by KILL signal
init: cron main process ended, respawning
init: cron main process (11629) killed by TERM signal
conftest[25564]: segfault at 0 ip 00000000004005c0 sp 00007ffc85208570 error 4 in conftest[400000+1000]
conftest[25593]: segfault at 0 ip 00007fc2038fe216 sp 00007ffdc9b695d8 error 4 in libc-2.19.so[7fc2037be000+1bb000]